본문 012-04840E Dynamics Cart 3 ® Purpose In this lab, the Dynamics Cart will be used to investigate one dimensional accelerated motion. You will launch the cart over the floor using the built-in spring plunger. The cart will "decelerate" over the floor under the combined action of rolling friction and floor slope. You will be able to establish whether or not the acceleration of the cart is constant. This will be done by initially assuming a constant acceleration and then by examining the results to see if they are consistent with this assumption. Theory The cart will be allowed to roll to a stop. The distance covered, D, and the total elapsed time, T, from launch to stop will be measured and recorded. The average velocity over this interval is given by: v av = (EQN-1) If the acceleration of the cart is constant as it rolls to a stop over the floor, then the initial instantaneous velocity of the cart at the final moment of launch is given by: v 0 = 2v av = (EQN-2) And the value of the acceleration would be given by: a = - (EQN-3) If the acceleration and v o are known, then the time, t 1, required to cover the distance (d) to some intermediate point (i.e. short of the final stopping point!) can be calculated by applying the quadratic formula to: d = v 0 t 1 + 1/2at 1 2 (EQN-4) Calculated values of t 1 will be compared with directly measured values. The extent to which the calculated values agree with the directly measured values is an indication of the con- stancy of the acceleration of the cart. Note your theoretical values in Table 1.1. Experiment 1: Kinematics (Average vs. Instantaneous Velocities) Figure 1.1 EQUIPMENT NEEDED: - Dynamics Cart (ME-9430) - Metric tape (SE-8712) - Stopwatch (SE-8702) v t 0 - v 0 T 2D T 2 D T 2D T 하고 싶은 말 좀 더 업그레이드하여 자료를 보완하여, 과제물을 꼼꼼하게 정성을 들어 작성했습니다. 위 자료 요약정리 잘되어 있으니 잘 참고하시어 학업에 나날이 발전이 있기를 기원합니다 ^^ 구입자 분의 앞날에 항상 무궁한 발전과 행복과 행운이 깃들기를 홧팅 키워드 등속, 실험, 예비, 운동, 레포트, 메뉴얼 |
2018년 6월 14일 목요일
등속운동실험 예비 레포트 (메뉴얼)
등속운동실험 예비 레포트 (메뉴얼)
피드 구독하기:
댓글 (Atom)
댓글 없음:
댓글 쓰기